• Fits twin, full, queen and king size beds
• Folds down for easy access
• ****Bed rail will be set at 47 in length

Instructions:

• When installing and using the product, adjust the height position of the lower crossbar. Adjust the lower crossbar to be more than 1.57 in and less than 4.72 in away from the mattress surface before use. (There will be safety risks if the lower crossbar is less than 1.57 in or more than 4.72 in away from the mattress surface).
• To install:
• Lift and remove the mattress entirely.
• Place the support feet directly against the bed board, ensuring: Full surface (no gaps), alignment with bed frame slats for maximum stability.
• Adjust the straps to your bed's width by pulling back on the plastic adjuster.
• Replace the mattress, ensuring it presses firmly against the support feet.
• Tighten the fixing band securely under the mattress. (Ensure no slack remains - test by gently pulling outward)
• Slide the height adjustment lever to the right and set the guardrail to your mattress thickness.
• The distance between the mattress surface and the lower crossbar should be maintained between more than 1.57 in and less than 4.72 in.
• Lift the unlock button to fold the bed rail down. Do the same for the other side. Flip both sides upward simultaneously until you hear dual locking clicks.
• Confirm rail is rigid (no gaps) and recheck all locks.